@set masver=2.6 @echo off ::============================================================================ :: :: Homepage: mass grave[.]dev :: Email: mas.help@outlook.com :: ::============================================================================ ::======================================================================================================================================== :: Set environment variables, it helps if they are misconfigured in the system setlocal EnableExtensions setlocal DisableDelayedExpansion set "PathExt=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC" set "SysPath=%SystemRoot%\System32" set "Path=%SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\System32\WindowsPowerShell\v1.0\" if exist "%SystemRoot%\Sysnative\reg.exe" ( set "SysPath=%SystemRoot%\Sysnative" set "Path=%SystemRoot%\Sysnative;%SystemRoot%;%SystemRoot%\Sysnative\Wbem;%SystemRoot%\Sysnative\WindowsPowerShell\v1.0\;%Path%" ) set "ComSpec=%SysPath%\cmd.exe" set "PSModulePath=%ProgramFiles%\WindowsPowerShell\Modules;%SysPath%\WindowsPowerShell\v1.0\Modules" set "_cmdf=%~f0" for %%# in (%*) do ( if /i "%%#"=="r1" set r1=1 if /i "%%#"=="r2" set r2=1 ) :: Re-launch the script with x64 process if it was initiated by x86 process on x64 bit Windows :: or with ARM64 process if it was initiated by x86/ARM32 process on ARM64 Windows if exist %SystemRoot%\Sysnative\cmd.exe if not defined r1 ( setlocal EnableDelayedExpansion start %SystemRoot%\Sysnative\cmd.exe /c ""!_cmdf!" %* r1" exit /b ) :: Re-launch the script with ARM32 process if it was initiated by x64 process on ARM64 Windows if exist %SystemRoot%\SysArm32\cmd.exe if %PROCESSOR_ARCHITECTURE%==AMD64 if not defined r2 ( setlocal EnableDelayedExpansion start %SystemRoot%\SysArm32\cmd.exe /c ""!_cmdf!" %* r2" exit /b ) ::======================================================================================================================================== set "blank=" set "mas=ht%blank%tps%blank%://mass%blank%grave.dev/" :: Check if Null service is working, it's important for the batch script sc query Null | find /i "RUNNING" if %errorlevel% NEQ 0 ( echo: echo The Null service, which is required for the script to operate, is not running. echo: echo: echo Help - %mas%troubleshoot echo: echo: ping 127.0.0.1 -n 20 ) cls :: Check LF line ending pushd "%~dp0" >nul findstr /v "$" "%~nx0" && ( echo: echo Error - Script either has an LF line ending issue or an empty line at the end of the script is missing. echo: echo: echo Help - %mas%troubleshoot echo: echo: ping 127.0.0.1 -n 20 >nul popd exit /b ) popd ::======================================================================================================================================== cls color 07 title Troubleshoot %masver% set _args= set _elev= set _unattended=0 set _args=%* if defined _args set _args=%_args:"=% if defined _args ( for %%A in (%_args%) do ( if /i "%%A"=="-el" set _elev=1 ) ) set "nul1=1>nul" set "nul2=2>nul" set "nul6=2^>nul" set "nul=>nul 2>&1" call :dk_setvar set "line=_________________________________________________________________________________________________" ::======================================================================================================================================== if %winbuild% LSS 7600 ( %nceline% echo Unsupported OS version detected [%winbuild%]. echo MAS only supports Windows 7/8/8.1/10/11 and their Server equivalents. goto dk_done ) ::======================================================================================================================================== :: Fix special character limitations in path name set "_work=%~dp0" if "%_work:~-1%"=="\" set "_work=%_work:~0,-1%" set "_batf=%~f0" set "_batp=%_batf:'=''%" set _PSarg="""%~f0""" -el %_args% set _PSarg=%_PSarg:'=''% set "_ttemp=%userprofile%\AppData\Local\Temp" setlocal EnableDelayedExpansion ::======================================================================================================================================== echo "!_batf!" | find /i "!_ttemp!" %nul1% && ( if /i not "!_work!"=="!_ttemp!" ( %eline% echo Script is launched from the temp folder, echo You are most likely running the script directly from the archive file. echo: echo Extract the archive file and launch the script from the extracted folder. goto dk_done ) ) ::======================================================================================================================================== :: Check PowerShell REM :PowerShellTest: $ExecutionContext.SessionState.LanguageMode :PowerShellTest: cmd /c "%psc% "$f=[io.file]::ReadAllText('!_batp!') -split ':PowerShellTest:\s*';iex ($f[1])"" | find /i "FullLanguage" %nul1% || ( %eline% cmd /c "%psc% "$ExecutionContext.SessionState.LanguageMode"" echo: cmd /c "%psc% "$ExecutionContext.SessionState.LanguageMode"" | find /i "FullLanguage" %nul1% && ( echo Failed to run Powershell command but Powershell is working. call :dk_color %Blue% "Check if your antivirus is blocking the script." echo: set fixes=%fixes% %mas%troubleshoot call :dk_color2 %Blue% "Help - " %_Yellow% " %mas%troubleshoot" ) || ( echo PowerShell is not working. Aborting... echo If you have applied restrictions on Powershell then undo those changes. echo: set fixes=%fixes% %mas%fix_powershell call :dk_color2 %Blue% "Help - " %_Yellow% " %mas%fix_powershell" ) goto dk_done ) ::======================================================================================================================================== :: Elevate script as admin and pass arguments and preventing loop %nul1% fltmc || ( if not defined _elev %psc% "start cmd.exe -arg '/c \"!_PSarg!\"' -verb runas" && exit /b %eline% echo This script needs admininistrator rights. echo Right click on this script and select 'Run as administrator'. goto dk_done ) ::======================================================================================================================================== :: Disable QuickEdit and launch from conhost.exe to avoid Terminal app if %winbuild% GEQ 17763 ( set terminal=1 ) else ( set terminal= ) :: Check if script is running in Terminal app set r1=$TB = [AppDomain]::CurrentDomain.DefineDynamicAssembly(4, 1).DefineDynamicModule(2, $False).DefineType(0); set r2=%r1% [void]$TB.DefinePInvokeMethod('GetConsoleWindow', 'kernel32.dll', 22, 1, [IntPtr], @(), 1, 3).SetImplementationFlags(128); set r3=%r2% [void]$TB.DefinePInvokeMethod('SendMessageW', 'user32.dll', 22, 1, [IntPtr], @([IntPtr], [UInt32], [IntPtr], [IntPtr]), 1, 3).SetImplementationFlags(128); set d1=%r3% $hIcon = $TB.CreateType(); $hWnd = $hIcon::GetConsoleWindow(); set d2=%d1% echo $($hIcon::SendMessageW($hWnd, 127, 0, 0) -ne [IntPtr]::Zero); if defined terminal ( %psc% "%d2%" %nul2% | find /i "True" %nul1% && set terminal= ) if %_unattended%==1 goto :skipQE for %%# in (%_args%) do (if /i "%%#"=="-qedit" goto :skipQE) if defined terminal ( set "launchcmd=start conhost.exe %psc%" ) else ( set "launchcmd=%psc%" ) :: Disable QuickEdit in current session set "d1=$t=[AppDomain]::CurrentDomain.DefineDynamicAssembly(4, 1).DefineDynamicModule(2, $False).DefineType(0);" set "d2=$t.DefinePInvokeMethod('GetStdHandle', 'kernel32.dll', 22, 1, [IntPtr], @([Int32]), 1, 3).SetImplementationFlags(128);" set "d3=$t.DefinePInvokeMethod('SetConsoleMode', 'kernel32.dll', 22, 1, [Boolean], @([IntPtr], [Int32]), 1, 3).SetImplementationFlags(128);" set "d4=$k=$t.CreateType(); $b=$k::SetConsoleMode($k::GetStdHandle(-10), 0x0080);" %launchcmd% "%d1% %d2% %d3% %d4% & cmd.exe '/c' '!_PSarg! -qedit'" && (exit /b) || (set terminal=1) :skipQE ::======================================================================================================================================== :: Check for updates set -= set old= for /f "delims=[] tokens=2" %%# in ('ping -4 -n 1 updatecheck.mass%-%grave.dev') do ( if not "%%#"=="" (echo "%%#" | find "127.69" %nul1% && (echo "%%#" | find "127.69.%masver%" %nul1% || set old=1)) ) if defined old ( echo ________________________________________________ %eline% echo Your version of MAS [%masver%] is outdated. echo ________________________________________________ echo: if not %_unattended%==1 ( echo [1] Get Latest MAS echo [0] Continue Anyway echo: call :dk_color %_Green% "Choose a menu option using your keyboard [1,0] :" choice /C:10 /N if !errorlevel!==2 rem if !errorlevel!==1 (start ht%-%tps://github.com/mass%-%gravel/Microsoft-Acti%-%vation-Scripts & start %mas% & exit /b) ) ) ::======================================================================================================================================== setlocal DisableDelayedExpansion :: Check desktop location set desktop= for /f "skip=2 tokens=2*" %%a in ('reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v Desktop') do call set "desktop=%%b" if not defined desktop for /f "delims=" %%a in ('%psc% "& {write-host $([Environment]::GetFolderPath('Desktop'))}"') do call set "desktop=%%a" if not defined desktop ( %eline% echo Unable to detect Desktop location, aborting... goto dk_done ) setlocal EnableDelayedExpansion ::======================================================================================================================================== :at_menu cls color 07 title Troubleshoot %masver% if not defined terminal mode 77, 30 echo: echo: echo: echo: echo: _______________________________________________________________ echo: call :dk_color2 %_White% " [1] " %_Green% "Help" echo: ___________________________________________________ echo: echo: [2] Dism RestoreHealth echo: [3] SFC Scannow echo: echo: [4] Fix WMI echo: [5] Fix Licensing echo: [6] Fix WPA Registry echo: ___________________________________________________ echo: echo: [0] %_exitmsg% echo: _______________________________________________________________ echo: call :dk_color2 %_White% " " %_Green% "Choose a menu option using your keyboard :" choice /C:1234560 /N set _erl=%errorlevel% if %_erl%==7 exit /b if %_erl%==6 start %mas%fix-wpa-registry &goto at_menu if %_erl%==5 goto:retokens if %_erl%==4 goto:fixwmi if %_erl%==3 goto:sfcscan if %_erl%==2 goto:dism_rest if %_erl%==1 start %mas%troubleshoot.html &goto at_menu goto :at_menu ::======================================================================================================================================== :dism_rest cls if not defined terminal mode 98, 30 title Dism /English /Online /Cleanup-Image /RestoreHealth if %winbuild% LSS 9200 ( %eline% echo Unsupported OS version detected. echo This command only works on Windows 8/8.1/10/11 and their Server equivalents. goto :at_back ) set _int= for %%a in (l.root-servers.net resolver1.opendns.com download.windowsupdate.com google.com) do if not defined _int ( for /f "delims=[] tokens=2" %%# in ('ping -n 1 %%a') do (if not "%%#"=="" set _int=1) ) echo: if defined _int ( echo Checking Internet Connection [Connected] ) else ( call :dk_color2 %_White% " " %Red% "Checking Internet Connection [Not connected]" ) echo %line% echo: echo DISM uses Windows Update to provide replacement files required to fix corruption. echo This will take 5-15 minutes or more.. echo %line% echo: echo Notes: echo: call :dk_color2 %_White% " - " %Gray% "Make sure the internet is connected." call :dk_color2 %_White% " - " %Gray% "Make sure that Windows update is properly working." echo: echo %line% echo: choice /C:09 /N /M "> [9] Continue [0] Go back : " if %errorlevel%==1 goto at_menu cls if not defined terminal mode 110, 30 for /f %%a in ('%psc% "(Get-Date).ToString('yyyyMMdd-HHmmssfff')"') do set _time=%%a %psc% Stop-Service TrustedInstaller -force %nul% copy /y /b "%SystemRoot%\logs\cbs\cbs.log" "%SystemRoot%\logs\cbs\backup_cbs_%_time%.log" %nul% copy /y /b "%SystemRoot%\logs\DISM\dism.log" "%SystemRoot%\logs\DISM\backup_dism_%_time%.log" %nul% del /f /q "%SystemRoot%\logs\cbs\cbs.log" %nul% del /f /q "%SystemRoot%\logs\DISM\dism.log" %nul% echo: echo Applying the command... echo dism /english /online /cleanup-image /restorehealth dism /english /online /cleanup-image /restorehealth timeout /t 5 %nul1% copy /y /b "%SystemRoot%\logs\cbs\cbs.log" "%SystemRoot%\logs\cbs\cbs_%_time%.log" %nul% copy /y /b "%SystemRoot%\logs\DISM\dism.log" "%SystemRoot%\logs\DISM\dism_%_time%.log" %nul% if not exist "!desktop!\AT_Logs\" md "!desktop!\AT_Logs\" %nul% call :compresslog cbs\cbs_%_time%.log AT_Logs\RHealth_CBS %nul% call :compresslog DISM\dism_%_time%.log AT_Logs\RHealth_DISM %nul% if not exist "!desktop!\AT_Logs\RHealth_CBS_%_time%.cab" ( copy /y /b "%SystemRoot%\logs\cbs\cbs.log" "!desktop!\AT_Logs\RHealth_CBS_%_time%.log" %nul% ) if not exist "!desktop!\AT_Logs\RHealth_DISM_%_time%.cab" ( copy /y /b "%SystemRoot%\logs\DISM\dism.log" "!desktop!\AT_Logs\RHealth_DISM_%_time%.log" %nul% ) echo: call :dk_color %Gray% "CBS and DISM logs are copied to the AT_Logs folder on your desktop." goto :at_back ::======================================================================================================================================== :sfcscan cls if not defined terminal mode 98, 30 title sfc /scannow echo: echo %line% echo: echo SFC will repair missing or corrupted system files. echo It is recommended you run the DISM option first before this one. echo This will take 10-15 minutes or more.. echo: echo If SFC could not fix something, then run the command again to see if it may be able echo to the next time. Sometimes it may take running the sfc /scannow command 3 times echo restarting the PC after each time to completely fix everything that it's able to. echo: echo %line% echo: choice /C:09 /N /M "> [9] Continue [0] Go back : " if %errorlevel%==1 goto at_menu cls for /f %%a in ('%psc% "(Get-Date).ToString('yyyyMMdd-HHmmssfff')"') do set _time=%%a %psc% Stop-Service TrustedInstaller -force %nul% copy /y /b "%SystemRoot%\logs\cbs\cbs.log" "%SystemRoot%\logs\cbs\backup_cbs_%_time%.log" %nul% del /f /q "%SystemRoot%\logs\cbs\cbs.log" %nul% echo: echo Applying the command,.. echo sfc /scannow sfc /scannow timeout /t 5 %nul1% copy /y /b "%SystemRoot%\logs\cbs\cbs.log" "%SystemRoot%\logs\cbs\cbs_%_time%.log" %nul% if not exist "!desktop!\AT_Logs\" md "!desktop!\AT_Logs\" %nul% call :compresslog cbs\cbs_%_time%.log AT_Logs\SFC_CBS %nul% if not exist "!desktop!\AT_Logs\SFC_CBS_%_time%.cab" ( copy /y /b "%SystemRoot%\logs\cbs\cbs.log" "!desktop!\AT_Logs\SFC_CBS_%_time%.log" %nul% ) echo: call :dk_color %Gray% "The CBS log was copied to the AT_Logs folder on your Desktop." goto :at_back ::======================================================================================================================================== :retokens cls if not defined terminal ( mode 125, 32 %psc% "&{$W=$Host.UI.RawUI.WindowSize;$B=$Host.UI.RawUI.BufferSize;$W.Height=31;$B.Height=200;$Host.UI.RawUI.WindowSize=$W;$Host.UI.RawUI.BufferSize=$B;}" ) title Fix Licensing ^(ClipSVC ^+ SPP ^+ OSPP^) echo: echo %line% echo: echo Notes: echo: echo - This option helps in troubleshooting generic activation issues. echo: echo - This option will: echo - Deactivate Windows and Office, you may need to reactivate. echo If Windows is activated with motherboard / OEM / Digital license then Windows will activate itself again. echo: echo - Clear ClipSVC, SPP and OSPP licenses. echo - Fix permissions of SPP tokens folder and registries. echo - Trigger the repair option for Office. echo: call :dk_color2 %_White% " - " %Red% "Apply this option only when it is necessary." echo: echo %line% echo: choice /C:09 /N /M "> [9] Continue [0] Go back : " if %errorlevel%==1 goto at_menu ::======================================================================================================================================== :: Rebuild ClipSVC Licences cls :cleanlicensing echo: echo %line% echo: call :dk_color %Blue% "Rebuilding ClipSVC Licenses..." echo: if %winbuild% LSS 10240 ( echo ClipSVC license rebuilding is supported only on Windows 10/11 and their Server equivalents. echo Skipping... goto :rebuildspptok ) %psc% "(([WMISEARCHER]'SELECT Name FROM SoftwareLicensingProduct WHERE LicenseStatus=1 AND GracePeriodRemaining=0 AND PartialProductKey IS NOT NULL AND LicenseDependsOn is NULL').Get()).Name" %nul2% | findstr /i "Windows" %nul1% && ( echo Windows is permanently activated. echo Skipping... goto :rebuildspptok ) echo Stopping ClipSVC service... %psc% Stop-Service ClipSVC -force %nul% timeout /t 2 %nul% echo: echo Applying the command to clean ClipSVC Licenses... echo rundll32 clipc.dll,ClipCleanUpState rundll32 clipc.dll,ClipCleanUpState if %winbuild% LEQ 10240 ( echo [Successful] ) else ( if exist "%ProgramData%\Microsoft\Windows\ClipSVC\tokens.dat" ( call :dk_color %Red% "[Failed]" ) else ( echo [Successful] ) ) :: Below registry key (Volatile & Protected) gets created after the ClipSVC License cleanup command, and gets automatically deleted after :: system restart. It needs to be deleted to activate the system without restart. set "RegKey=HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ClipSVC\Volatile\PersistedSystemState" set "_ident=HKU\S-1-5-19\SOFTWARE\Microsoft\IdentityCRL" reg query "%RegKey%" %nul% && %nul% call :regownstart reg delete "%RegKey%" /f %nul% echo: echo Deleting a Volatile ^& Protected Registry Key... echo [%RegKey%] reg query "%RegKey%" %nul% && ( call :dk_color %Red% "[Failed]" echo Restart your system, that will delete this registry key automatically. ) || ( echo [Successful] ) :: Clear HWID token related registry to fix activation incase there is any corruption echo: echo Deleting IdentityCRL... echo [%_ident%] reg delete "%_ident%" /f %nul% reg query "%_ident%" %nul% && ( call :dk_color %Red% "[Failed]" ) || ( echo [Successful] ) %psc% Stop-Service ClipSVC -force %nul% :: Rebuild ClipSVC folder to fix permission issues echo: if %winbuild% GTR 10240 ( echo Deleting folder %ProgramData%\Microsoft\Windows\ClipSVC\ rmdir /s /q "C:\ProgramData\Microsoft\Windows\ClipSvc" %nul% if exist "%ProgramData%\Microsoft\Windows\ClipSVC\" ( call :dk_color %Red% "[Failed]" ) else ( echo [Successful] ) echo: echo Rebuilding the %ProgramData%\Microsoft\Windows\ClipSVC\ folder... %psc% Start-Service ClipSVC %nul% timeout /t 3 %nul% if not exist "%ProgramData%\Microsoft\Windows\ClipSVC\" timeout /t 5 %nul% if not exist "%ProgramData%\Microsoft\Windows\ClipSVC\" ( call :dk_color %Red% "[Failed]" ) else ( echo [Successful] ) ) echo: echo Restarting wlidsvc ^& LicenseManager services... for %%# in (wlidsvc LicenseManager) do (%psc% "Start-Job { Restart-Service %%# } | Wait-Job -Timeout 10 | Out-Null") ::======================================================================================================================================== :: Rebuild SPP Tokens :rebuildspptok echo: echo %line% echo: call :dk_color %Blue% "Rebuilding SPP licensing tokens..." echo: call :scandat check if not defined token ( call :dk_color %Red% "tokens.dat file was not found." ) else ( echo tokens.dat file: [%token%] ) set tokenstore= set badregistry= for /f "skip=2 tokens=2*" %%a in ('reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform" /v TokenStore %nul6%') do call set "tokenstore=%%b" if %winbuild% GEQ 9200 if /i not "%tokenstore%"=="%SysPath%\spp\store" if /i not "%tokenstore%"=="%SysPath%\spp\store\2.0" if /i not "%tokenstore%"=="%SysPath%\spp\store_test\2.0" ( set badregistry=1 echo: call :dk_color %Red% "Correct path was not found in the TokenStore registry. [%tokenstore%]" ) :: Check sppsvc permissions and apply fixes if %winbuild% GEQ 9200 if not defined badregistry ( echo: echo Checking for SPP permission related issues... call :checkperms if defined permerror ( call :dk_color %Red% "[!permerror!]" %psc% "$f=[io.file]::ReadAllText('!_batp!') -split ':fixsppperms\:.*';iex ($f[1])" %nul% call :checkperms if defined permerror ( call :dk_color %Red% "[!permerror!] [Failed To Fix]" ) else ( call :dk_color %Green% "[Successfully Fixed]" ) ) else ( echo [No Error Found] ) ) echo: echo Stopping sppsvc service... %psc% Stop-Service sppsvc -force %nul% if %winbuild% LSS 9200 ( REM Fix issues caused by Update KB971033 in Windows 7 REM https://support.microsoft.com/help/4487266 echo: echo Checking for update KB971033... %psc% "if (Get-Hotfix -Id KB971033 -ErrorAction SilentlyContinue) {Exit 3}" %nul% if !errorlevel!==3 ( echo Found, uninstalling it... wusa /uninstall /quiet /norestart /kb:971033 ) else ( echo [Not Found] ) %psc% Stop-Service sppuinotify -force %nul% sc config sppuinotify start= disabled del /f /q %SysPath%\7B296FB0-376B-497e-B012-9C450E1B7327-*.C7483456-A289-439d-8115-601632D005A0 /ah ) echo: call :scandat delete call :scandat check if defined token ( echo: call :dk_color %Red% "Failed to delete .dat files." echo: ) echo: echo Reinstalling system licenses... %psc% "Stop-Service sppsvc -force; $sls = Get-WmiObject SoftwareLicensingService; $f=[io.file]::ReadAllText('!_batp!') -split ':xrm\:.*';iex ($f[1]); ReinstallLicenses" %nul% if %errorlevel% NEQ 0 %psc% "$sls = Get-WmiObject SoftwareLicensingService; $f=[io.file]::ReadAllText('!_batp!') -split ':xrm\:.*';iex ($f[1]); ReinstallLicenses" %nul% if %errorlevel% EQU 0 ( echo [Successful] ) else ( call :dk_color %Red% "[Failed]" ) call :scandat check echo: if not defined token ( call :dk_color %Red% "Failed to rebuild tokens.dat file." ) else ( echo tokens.dat file was rebuilt successfully. ) if %winbuild% LSS 9200 ( sc config sppuinotify start= demand ) ::======================================================================================================================================== :: Rebuild OSPP Tokens echo: echo %line% echo: call :dk_color %Blue% "Rebuilding OSPP licensing tokens..." echo: sc qc osppsvc %nul% || ( echo OSPP-based Office is not installed. echo Skipping rebuilding OSPP tokens... goto :repairoffice ) call :scandatospp check if not defined token ( call :dk_color %Red% "tokens.dat file was not found." ) else ( echo tokens.dat file: [%token%] ) echo: echo Stopping the osppsvc service... %psc% Stop-Service osppsvc -force %nul% echo: call :scandatospp delete call :scandatospp check if defined token ( echo: call :dk_color %Red% "Failed to delete .dat files." echo: ) echo: echo Starting the osppsvc service to generate tokens.dat... %psc% Start-Service osppsvc %nul% call :scandatospp check if not defined token ( %psc% Stop-Service osppsvc -force %nul% %psc% Start-Service osppsvc %nul% timeout /t 3 %nul% ) call :scandatospp check echo: if not defined token ( call :dk_color %Red% "Failed to rebuild tokens.dat file." ) else ( echo tokens.dat file was rebuilt successfully. ) ::======================================================================================================================================== :repairoffice echo: echo %line% echo: call :dk_color %Blue% "Repairing Office licenses..." echo: for /f "skip=2 tokens=2*" %%a in ('reg query "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment" /v PROCESSOR_ARCHITECTURE') do set arch=%%b if /i "%arch%"=="ARM64" ( echo: echo ARM64 Windows detected. echo You need to use the Repair option in Windows Settings for Office. echo: start ms-settings:appsfeatures goto :repairend ) if /i "%arch%"=="x86" ( set arch=X86 ) else ( set arch=X64 ) for %%# in (68 86) do ( for %%A in (msi14 msi15 msi16 c2r14 c2r15 c2r16) do (set %%A_%%#=&set %%Arepair%%#=) ) set _68=HKLM\SOFTWARE\Microsoft\Office set _86=HKLM\SOFTWARE\Wow6432Node\Microsoft\Office reg query %_68%\14.0\CVH /f Click2run /k %nul% && (set "c2r14_68=Office 14.0 C2R x86/x64" & set "c2r14repair68=") reg query %_86%\14.0\CVH /f Click2run /k %nul% && (set "c2r14_86=Office 14.0 C2R x86" & set "c2r14repair86=") for /f "skip=2 tokens=2*" %%a in ('"reg query %_86%\14.0\Common\InstallRoot /v Path" %nul6%') do if exist "%%b\EntityPicker.dll" (set "msi14_86=Office 14.0 MSI x86" & set "msi14repair86=%systemdrive%\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Setup.exe") for /f "skip=2 tokens=2*" %%a in ('"reg query %_68%\14.0\Common\InstallRoot /v Path" %nul6%') do if exist "%%b\EntityPicker.dll" (set "msi14_68=Office 14.0 MSI x86/x64" & set "msi14repair68=%systemdrive%\Program Files\Common Files\microsoft shared\OFFICE14\Office Setup Controller\Setup.exe") for /f "skip=2 tokens=2*" %%a in ('"reg query %_86%\15.0\Common\InstallRoot /v Path" %nul6%') do if exist "%%b\EntityPicker.dll" (set "msi15_86=Office 15.0 MSI x86" & set "msi15repair86=%systemdrive%\Program Files (x86)\Common Files\Microsoft Shared\OFFICE15\Office Setup Controller\Setup.exe") for /f "skip=2 tokens=2*" %%a in ('"reg query %_68%\15.0\Common\InstallRoot /v Path" %nul6%') do if exist "%%b\EntityPicker.dll" (set "msi15_68=Office 15.0 MSI x86/x64" & set "msi15repair68=%systemdrive%\Program Files\Common Files\microsoft shared\OFFICE15\Office Setup Controller\Setup.exe") for /f "skip=2 tokens=2*" %%a in ('"reg query %_86%\16.0\Common\InstallRoot /v Path" %nul6%') do if exist "%%b\EntityPicker.dll" (set "msi16_86=Office 16.0 MSI x86" & set "msi16repair86=%systemdrive%\Program Files (x86)\Common Files\Microsoft Shared\OFFICE16\Office Setup Controller\Setup.exe") for /f "skip=2 tokens=2*" %%a in ('"reg query %_68%\16.0\Common\InstallRoot /v Path" %nul6%') do if exist "%%b\EntityPicker.dll" (set "msi16_68=Office 16.0 MSI x86/x64" & set "msi16repair68=%systemdrive%\Program Files\Common Files\Microsoft Shared\OFFICE16\Office Setup Controller\Setup.exe") for /f "skip=2 tokens=2*" %%a in ('"reg query %_86%\15.0\ClickToRun /v InstallPath" %nul6%') do if exist "%%b\root\Licenses\ProPlus*.xrm-ms" (set "c2r15_86=Office 15.0 C2R x86" & set "c2r15repair86=%systemdrive%\Program Files\Microsoft Office 15\Client%arch%\integratedoffice.exe") for /f "skip=2 tokens=2*" %%a in ('"reg query %_68%\15.0\ClickToRun /v InstallPath" %nul6%') do if exist "%%b\root\Licenses\ProPlus*.xrm-ms" (set "c2r15_68=Office 15.0 C2R x86/x64" & set "c2r15repair68=%systemdrive%\Program Files\Microsoft Office 15\Client%arch%\integratedoffice.exe") for /f "skip=2 tokens=2*" %%a in ('"reg query %_86%\ClickToRun /v InstallPath" %nul6%') do if exist "%%b\root\Licenses16\ProPlus*.xrm-ms" (set "c2r16_86=Office 16.0 C2R x86" & set "c2r16repair86=%systemdrive%\Program Files\Microsoft Office 15\Client%arch%\OfficeClickToRun.exe") for /f "skip=2 tokens=2*" %%a in ('"reg query %_68%\ClickToRun /v InstallPath" %nul6%') do if exist "%%b\root\Licenses16\ProPlus*.xrm-ms" (set "c2r16_68=Office 16.0 C2R x86/x64" & set "c2r16repair68=%systemdrive%\Program Files\Microsoft Office 15\Client%arch%\OfficeClickToRun.exe") set uwp16= if %winbuild% GEQ 10240 ( %psc% "Get-AppxPackage -name "Microsoft.Office.Desktop"" | find /i "Office" %nul1% && set uwp16=Office 16.0 UWP ) set /a counter=0 echo Checking installed Office versions... echo: for %%# in ( "%msi14_68%" "%msi14_86%" "%msi15_68%" "%msi15_86%" "%msi16_68%" "%msi16_86%" "%c2r14_68%" "%c2r14_86%" "%c2r15_68%" "%c2r15_86%" "%c2r16_68%" "%c2r16_86%" "%uwp16%" ) do ( if not "%%#"=="""" ( set insoff=%%# set insoff=!insoff:"=! echo [!insoff!] set /a counter+=1 ) ) if %counter% GTR 1 ( %eline% echo Multiple Office versions found. echo It is recommended to only install one version of Office. echo ________________________________________________________________ echo: ) if %counter% EQU 0 ( echo: echo Office ^(2010 and later^) is not installed. goto :repairend echo: ) else ( echo: call :dk_color %_Yellow% "A new window will appear, in that window you need to select [Quick Repair] option." if defined terminal ( call :dk_color %_Yellow% "Press [0] to continue..." choice /c 0 /n ) else ( call :dk_color %_Yellow% "Press any key to continue..." pause %nul1% ) ) if defined uwp16 ( echo: echo Note: Skipping repair for Office 16.0 UWP... echo You need to use the Reset option in Windows Settings instead. echo ________________________________________________________________ echo: start ms-settings:appsfeatures ) set c2r14= if defined c2r14_68 set c2r14=1 if defined c2r14_86 set c2r14=1 if defined c2r14 ( echo: echo Note: Skipping repair for Office 14.0 C2R... echo You need to use the Repair option in Windows Settings for it. echo ________________________________________________________________ echo: start appwiz.cpl ) if defined msi14_68 if exist "%msi14repair68%" echo Running - "%msi14repair68%" & "%msi14repair68%" if defined msi14_86 if exist "%msi14repair86%" echo Running - "%msi14repair86%" & "%msi14repair86%" if defined msi15_68 if exist "%msi15repair68%" echo Running - "%msi15repair68%" & "%msi15repair68%" if defined msi15_86 if exist "%msi15repair86%" echo Running - "%msi15repair86%" & "%msi15repair86%" if defined msi16_68 if exist "%msi16repair68%" echo Running - "%msi16repair68%" & "%msi16repair68%" if defined msi16_86 if exist "%msi16repair86%" echo Running - "%msi16repair86%" & "%msi16repair86%" if defined c2r15_68 if exist "%c2r15repair68%" echo Running - "%c2r15repair68%" REPAIRUI RERUNMODE & "%c2r15repair68%" REPAIRUI RERUNMODE if defined c2r15_86 if exist "%c2r15repair86%" echo Running - "%c2r15repair86%" REPAIRUI RERUNMODE & "%c2r15repair86%" REPAIRUI RERUNMODE if defined c2r16_68 if exist "%c2r16repair68%" echo Running - "%c2r16repair68%" scenario=Repair & "%c2r16repair68%" scenario=Repair if defined c2r16_86 if exist "%c2r16repair86%" echo Running - "%c2r16repair86%" scenario=Repair & "%c2r16repair86%" scenario=Repair :repairend echo: echo %line% echo: echo: call :dk_color %Green% "Finished" goto :at_back ::======================================================================================================================================== :fixwmi cls if not defined terminal mode 98, 34 title Fix WMI :: https://techcommunity.microsoft.com/t5/ask-the-performance-team/wmi-repository-corruption-or-not/ba-p/375484 if exist "%SystemRoot%\Servicing\Packages\Microsoft-Windows-Server*Edition~*.mum" ( %eline% echo Rebuilding WMI is not recommended on Windows Server, aborting... goto :at_back ) echo: echo Checking WMI... call :checkwmi :: Apply basic fix first and check if defined error ( %psc% Stop-Service Winmgmt -force %nul% winmgmt /salvagerepository %nul% call :checkwmi ) if not defined error ( echo [Working] echo No need to apply this option, aborting... goto :at_back ) call :dk_color %Red% "[Not Responding]" set _corrupt= sc start Winmgmt %nul% if %errorlevel% EQU 1060 set _corrupt=1 sc query Winmgmt %nul% || set _corrupt=1 for %%G in (DependOnService Description DisplayName ErrorControl ImagePath ObjectName Start Type) do if not defined _corrupt (reg query HKLM\SYSTEM\CurrentControlSet\Services\Winmgmt /v %%G %nul% || set _corrupt=1) echo: if defined _corrupt ( %eline% echo Winmgmt service is corrupted, aborting... goto :at_back ) echo Disabling Winmgmt service... sc config Winmgmt start= disabled %nul% if %errorlevel% EQU 0 ( echo [Successful] ) else ( call :dk_color %Red% "[Failed, aborting...]" sc config Winmgmt start= auto %nul% goto :at_back ) echo: echo Stopping Winmgmt service... %psc% Stop-Service Winmgmt -force %nul% %psc% Stop-Service Winmgmt -force %nul% %psc% Stop-Service Winmgmt -force %nul% sc query Winmgmt | find /i "STOPPED" %nul% && ( echo [Successful] ) || ( call :dk_color %Red% "[Failed]" echo: call :dk_color %Blue% "It is recommended to select [Restart] option and then apply Fix WMI option again." echo %line% echo: choice /C:21 /N /M "> [1] Restart [2] Revert Back Changes :" if !errorlevel!==1 (sc config Winmgmt start= auto %nul%&goto :at_back) echo: echo Restarting... shutdown -t 5 -r exit ) echo: echo Deleting WMI repository... rmdir /s /q "%SysPath%\wbem\repository\" %nul% if exist "%SysPath%\wbem\repository\" ( call :dk_color %Red% "[Failed]" ) else ( echo [Successful] ) echo: echo Enabling Winmgmt service... sc config Winmgmt start= auto %nul% if %errorlevel% EQU 0 ( echo [Successful] ) else ( call :dk_color %Red% "[Failed]" ) call :checkwmi if not defined error ( echo: echo Checking WMI... call :dk_color %Green% "[Working]" goto :at_back ) echo: echo Registering .dll's, compiling .mof's and .mfl's... call :registerobj %nul% echo: echo Checking WMI... call :checkwmi if defined error ( call :dk_color %Red% "[Not Responding]" echo: echo Run [Dism RestoreHealth] and [SFC Scannow] options and make sure there are no errors. ) else ( call :dk_color %Green% "[Working]" ) goto :at_back :registerobj :: https://eskonr.com/2012/01/how-to-fix-wmi-issues-automatically/ %psc% Stop-Service Winmgmt -force %nul% cd /d %SysPath%\wbem\ regsvr32 /s %SysPath%\scecli.dll regsvr32 /s %SysPath%\userenv.dll mofcomp cimwin32.mof mofcomp cimwin32.mfl mofcomp rsop.mof mofcomp rsop.mfl for /f %%s in ('dir /b /s *.dll') do regsvr32 /s %%s for /f %%s in ('dir /b *.mof') do mofcomp %%s for /f %%s in ('dir /b *.mfl') do mofcomp %%s winmgmt /salvagerepository winmgmt /resetrepository exit /b :checkwmi :: https://learn.microsoft.com/en-us/windows/win32/wmisdk/wmi-error-constants set error= %psc% "Get-WmiObject -Class Win32_ComputerSystem | Select-Object -Property CreationClassName" %nul2% | find /i "computersystem" %nul1% if %errorlevel% NEQ 0 (set error=1& exit /b) winmgmt /verifyrepository %nul% if %errorlevel% NEQ 0 (set error=1& exit /b) %psc% "try { $null=([WMISEARCHER]'SELECT * FROM SoftwareLicensingService').Get().Version; exit 0 } catch { exit $_.Exception.InnerException.HResult }" %nul% cmd /c exit /b %errorlevel% echo "0x%=ExitCode%" | findstr /i "0x800410 0x800440" %nul1% if %errorlevel% EQU 0 set error=1 exit /b ::======================================================================================================================================== :at_back echo: echo %line% echo: if defined terminal ( call :dk_color %_Yellow% "Press [0] to %_exitmsg%..." choice /c 0 /n ) else ( call :dk_color %_Yellow% "Press any key to %_exitmsg%..." pause %nul1% ) goto :at_menu ::======================================================================================================================================== :compresslog :: https://stackoverflow.com/a/46268232 set "ddf="%SystemRoot%\Temp\ddf"" %nul% del /q /f %ddf% echo/.New Cabinet>%ddf% echo/.set Cabinet=ON>>%ddf% echo/.set CabinetFileCountThreshold=0;>>%ddf% echo/.set Compress=ON>>%ddf% echo/.set CompressionType=LZX>>%ddf% echo/.set CompressionLevel=7;>>%ddf% echo/.set CompressionMemory=21;>>%ddf% echo/.set FolderFileCountThreshold=0;>>%ddf% echo/.set FolderSizeThreshold=0;>>%ddf% echo/.set GenerateInf=OFF>>%ddf% echo/.set InfFileName=nul>>%ddf% echo/.set MaxCabinetSize=0;>>%ddf% echo/.set MaxDiskFileCount=0;>>%ddf% echo/.set MaxDiskSize=0;>>%ddf% echo/.set MaxErrors=1;>>%ddf% echo/.set RptFileName=nul>>%ddf% echo/.set UniqueFiles=ON>>%ddf% for /f "tokens=* delims=" %%D in ('dir /a:-D/b/s "%SystemRoot%\logs\%1"') do ( echo/"%%~fD" /inf=no;>>%ddf% ) makecab /F %ddf% /D DiskDirectory1="" /D CabinetNameTemplate="!desktop!\%2_%_time%.cab" del /q /f %ddf% exit /b ::======================================================================================================================================== :checkperms :: This code checks if SPP has permission access to tokens folder and required registry keys. Incorrect permissions are often set by HWID gaming spoofers. set permerror= if not exist "%tokenstore%\" set "permerror=Error Found In Token Folder" for %%# in ( "%tokenstore%+FullControl" "HKLM:\SYSTEM\WPA+QueryValues, EnumerateSubKeys, WriteKey" "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform+SetValue" ) do for /f "tokens=1,2 delims=+" %%A in (%%#) do if not defined permerror ( %psc% "$acl = (Get-Acl '%%A' | fl | Out-String); if (-not ($acl -match 'NT SERVICE\\sppsvc Allow %%B') -or ($acl -match 'NT SERVICE\\sppsvc Deny')) {Exit 2}" %nul% if !errorlevel!==2 ( if "%%A"=="%tokenstore%" ( set "permerror=Error Found In Token Folder" ) else ( set "permerror=Error Found In SPP registries" ) ) ) REM https://learn.microsoft.com/office/troubleshoot/activation/license-issue-when-start-office-application if not defined permerror ( reg query "HKU\S-1-5-20\Software\Microsoft\Windows NT\CurrentVersion" %nul% && ( set "pol=HKU\S-1-5-20\Software\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform\Policies" reg query "!pol!" %nul% || reg add "!pol!" %nul% %psc% "$netServ = (New-Object Security.Principal.SecurityIdentifier('S-1-5-20')).Translate([Security.Principal.NTAccount]).Value; $aclString = Get-Acl 'Registry::!pol!' | Format-List | Out-String; if (-not ($aclString.Contains($netServ + ' Allow FullControl') -or $aclString.Contains('NT SERVICE\sppsvc Allow FullControl')) -or ($aclString.Contains('Deny'))) {Exit 3}" %nul% if !errorlevel!==3 set "permerror=Error Found In S-1-5-20 SPP" ) ) exit /b ::======================================================================================================================================== :: Fix SPP related registry and folder permissions :fixsppperms: # Fix perms for Token Folder if ($env:permerror -eq 'Error Found In Token Folder') { New-Item -Path $env:tokenstore -ItemType Directory -Force $sddl = 'O:BAG:BAD:PAI(A;OICI;FA;;;SY)(A;OICI;FA;;;BA)(A;OICIIO;GR;;;BU)(A;;FR;;;BU)(A;OICI;FA;;;S-1-5-80-123231216-2592883651-3715271367-3753151631-4175906628)' $AclObject = New-Object System.Security.AccessControl.DirectorySecurity $AclObject.SetSecurityDescriptorSddlForm($sddl) Set-Acl -Path $env:tokenstore -AclObject $AclObject exit } # Fix perms for SPP registries if ($env:permerror -eq 'Error Found In SPP Registries') { $acl = Get-Acl 'HKLM:\SYSTEM\WPA' $rule = New-Object System.Security.AccessControl.RegistryAccessRule ('NT Service\sppsvc', 'QueryValues, EnumerateSubKeys, WriteKey', 'ContainerInherit, ObjectInherit', 'None', 'Allow') $acl.ResetAccessRule($rule) $acl.SetAccessRule($rule) Set-Acl -Path 'HKLM:\SYSTEM\WPA' -AclObject $acl $acl = Get-Acl 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform' $rule = New-Object System.Security.AccessControl.RegistryAccessRule ('NT Service\sppsvc', 'SetValue', 'ContainerInherit, ObjectInherit', 'None', 'Allow') $acl.ResetAccessRule($rule) $acl.SetAccessRule($rule) Set-Acl -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform' -AclObject $acl exit } # Fix perms for SPP in HKU\S-1-5-20 # https://learn.microsoft.com/office/troubleshoot/activation/license-issue-when-start-office-application if ($env:permerror -ne 'Error found in S-1-5-20 SPP') { exit } if (-not (Test-Path 'Registry::HKU\S-1-5-20\Software\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform')) { exit } # https://stackoverflow.com/a/35843420 function Take-Permissions { param($rootKey, $key, [System.Security.Principal.SecurityIdentifier]$sid = 'S-1-5-32-545', $recurse = $true) switch -regex ($rootKey) { 'HKCU|HKEY_CURRENT_USER' { $rootKey = 'CurrentUser' } 'HKLM|HKEY_LOCAL_MACHINE' { $rootKey = 'LocalMachine' } 'HKCR|HKEY_CLASSES_ROOT' { $rootKey = 'ClassesRoot' } 'HKCC|HKEY_CURRENT_CONFIG' { $rootKey = 'CurrentConfig' } 'HKU|HKEY_USERS' { $rootKey = 'Users' } } ### Step 1 - escalate current process's privilege # get SeTakeOwnership, SeBackup and SeRestore privileges before executes next lines, script needs Admin privilege $AssemblyBuilder = [AppDomain]::CurrentDomain.DefineDynamicAssembly(4, 1) $ModuleBuilder = $AssemblyBuilder.DefineDynamicModule(2, $False) $TypeBuilder = $ModuleBuilder.DefineType(0) $TypeBuilder.DefinePInvokeMethod('RtlAdjustPrivilege', 'ntdll.dll', 'Public, Static', 1, [int], @([int], [bool], [bool], [bool].MakeByRefType()), 1, 3) | Out-Null 9, 17, 18 | ForEach-Object { $TypeBuilder.CreateType()::RtlAdjustPrivilege($_, $true, $false, [ref]$false) | Out-Null } function Take-KeyPermissions { param($rootKey, $key, $sid, $recurse, $recurseLevel = 0) ### Step 2 - get ownerships of key - it works only for current key $regKey = [Microsoft.Win32.Registry]::$rootKey.OpenSubKey($key, 'ReadWriteSubTree', 'TakeOwnership') $acl = New-Object System.Security.AccessControl.RegistrySecurity $acl.SetOwner($sid) $regKey.SetAccessControl($acl) ### Step 3 - enable inheritance of permissions (not ownership) for current key from parent $acl.SetAccessRuleProtection($false, $false) $regKey.SetAccessControl($acl) ### Step 4 - only for top-level key, change permissions for current key and propagate it for subkeys # to enable propagations for subkeys, it needs to execute Steps 2-3 for each subkey (Step 5) if ($recurseLevel -eq 0) { $regKey = $regKey.OpenSubKey('', 'ReadWriteSubTree', 'ChangePermissions') $rule = New-Object System.Security.AccessControl.RegistryAccessRule($sid, 'FullControl', 'ContainerInherit', 'None', 'Allow') $acl.ResetAccessRule($rule) $regKey.SetAccessControl($acl) } ### Step 5 - recursively repeat steps 2-5 for subkeys if ($recurse) { foreach ($subKey in $regKey.OpenSubKey('').GetSubKeyNames()) { Take-KeyPermissions $rootKey ($key + '\' + $subKey) $sid $recurse ($recurseLevel + 1) } } } Take-KeyPermissions $rootKey $key $sid $recurse } Take-Permissions "Users" "S-1-5-20\Software\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform" "S-1-5-20" :fixsppperms: ::======================================================================================================================================== :: Install License files using Powershell/WMI instead of slmgr.vbs :xrm: function InstallLicenseFile($Lsc) { try { $null = $sls.InstallLicense([IO.File]::ReadAllText($Lsc)) } catch { $host.SetShouldExit($_.Exception.HResult) } } function InstallLicenseArr($Str) { $a = $Str -split ';' ForEach ($x in $a) {InstallLicenseFile "$x"} } function InstallLicenseDir($Loc) { dir $Loc *.xrm-ms -af -s | select -expand FullName | % {InstallLicenseFile "$_"} } function ReinstallLicenses() { $Oem = "$env:SysPath\oem" $Spp = "$env:SysPath\spp\tokens" InstallLicenseDir "$Spp" If (Test-Path $Oem) {InstallLicenseDir "$Oem"} } :xrm: ::======================================================================================================================================== :scandat set token= for %%# in ( %SysPath%\spp\store_test\2.0\ %SysPath%\spp\store\ %SysPath%\spp\store\2.0\ %Systemdrive%\Windows\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform\ ) do ( if %1==check ( if exist %%#tokens.dat set token=%%#tokens.dat ) if %1==delete ( if exist %%# ( %nul% dir /a-d /s "%%#*.dat" && ( attrib -r -s -h "%%#*.dat" /S del /S /F /Q "%%#*.dat" ) ) ) ) exit /b :scandatospp set token= for %%# in ( %ProgramData%\Microsoft\OfficeSoftwareProtectionPlatform\ ) do ( if %1==check ( if exist %%#tokens.dat set token=%%#tokens.dat ) if %1==delete ( if exist %%# ( %nul% dir /a-d /s "%%#*.dat" && ( attrib -r -s -h "%%#*.dat" /S del /S /F /Q "%%#*.dat" ) ) ) ) exit /b ::======================================================================================================================================== :regownstart %psc% "$f=[io.file]::ReadAllText('!_batp!') -split ':regown\:.*';iex ($f[1]);" exit /b :: Below code takes ownership of a volatile registry key and deletes it :: HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ClipSVC\Volatile\PersistedSystemState :regown: $AssemblyBuilder = [AppDomain]::CurrentDomain.DefineDynamicAssembly(4, 1) $ModuleBuilder = $AssemblyBuilder.DefineDynamicModule(2, $False) $TypeBuilder = $ModuleBuilder.DefineType(0) $TypeBuilder.DefinePInvokeMethod('RtlAdjustPrivilege', 'ntdll.dll', 'Public, Static', 1, [int], @([int], [bool], [bool], [bool].MakeByRefType()), 1, 3) | Out-Null $TypeBuilder.CreateType()::RtlAdjustPrivilege(9, $true, $false, [ref]$false) | Out-Null $SID = New-Object System.Security.Principal.SecurityIdentifier('S-1-5-32-544') $IDN = ($SID.Translate([System.Security.Principal.NTAccount])).Value $Admin = New-Object System.Security.Principal.NTAccount($IDN) $path = 'SOFTWARE\Microsoft\Windows NT\CurrentVersion\ClipSVC\Volatile\PersistedSystemState' $key = [Microsoft.Win32.RegistryKey]::OpenBaseKey('LocalMachine', 'Registry64').OpenSubKey($path, 'ReadWriteSubTree', 'takeownership') $acl = $key.GetAccessControl() $acl.SetOwner($Admin) $key.SetAccessControl($acl) $rule = New-Object System.Security.AccessControl.RegistryAccessRule($Admin,"FullControl","Allow") $acl.SetAccessRule($rule) $key.SetAccessControl($acl) :regown: ::======================================================================================================================================== :dk_done echo: if defined fixes ( call :dk_color2 %Blue% "Press [1] to open Troubleshoot page " %Gray% " Press [0] to ignore" choice /C:10 /N if !errorlevel!==1 (for %%# in (%fixes%) do (start %%#)) ) if defined terminal ( call :dk_color %_Yellow% "Press [0] to %_exitmsg%..." choice /c 0 /n ) else ( call :dk_color %_Yellow% "Press any key to %_exitmsg%..." pause %nul1% ) exit /b ::======================================================================================================================================== :dk_color if %_NCS% EQU 1 ( echo %esc%[%~1%~2%esc%[0m ) else ( %psc% write-host -back '%1' -fore '%2' '%3' ) exit /b :dk_color2 if %_NCS% EQU 1 ( echo %esc%[%~1%~2%esc%[%~3%~4%esc%[0m ) else ( %psc% write-host -back '%1' -fore '%2' '%3' -NoNewline; write-host -back '%4' -fore '%5' '%6' ) exit /b ::======================================================================================================================================== :: Set variables :dk_setvar set psc=powershell.exe set winbuild=1 for /f "tokens=6 delims=[]. " %%G in ('ver') do set winbuild=%%G set _NCS=1 if %winbuild% LSS 10586 set _NCS=0 if %winbuild% GEQ 10586 reg query "HKCU\Console" /v ForceV2 %nul2% | find /i "0x0" %nul1% && (set _NCS=0) if %_NCS% EQU 1 ( for /F %%a in ('echo prompt $E ^| cmd') do set "esc=%%a" set "Red="41;97m"" set "Gray="100;97m"" set "Green="42;97m"" set "Blue="44;97m"" set "_Red="40;91m"" set "_White="40;37m"" set "_Green="40;92m"" set "_Yellow="40;93m"" ) else ( set "Red="Red" "white"" set "Gray="Darkgray" "white"" set "Green="DarkGreen" "white"" set "Blue="Blue" "white"" set "_Red="Black" "Red"" set "_White="Black" "Gray"" set "_Green="Black" "Green"" set "_Yellow="Black" "Yellow"" ) set "nceline=echo: &echo ==== ERROR ==== &echo:" set "eline=echo: &call :dk_color %Red% "==== ERROR ====" &echo:" if %~z0 GEQ 200000 ( set "_exitmsg=Go back" set "_fixmsg=Go back to Main Menu, select Troubleshoot and run Fix Licensing option." ) else ( set "_exitmsg=Exit" set "_fixmsg=In MAS folder, run Troubleshoot script and select Fix Licensing option." ) exit /b ::======================================================================================================================================== :: Leave empty line below